Bench Press Battlefield - Extreme Bench Pressing
by Christian Thibaudeau
Manipulate the CNS and Tap Into Hidden Strength!
The Art of War
Think of your body as a vast army made up of many regiments and divisions. This
army has great potential; all it needs is the right leadership. For athletes and
bodybuilders, the nervous system is the General of this army. It's the nervous
system which directs and coordinates muscular actions. As such, we're pretty
much as strong as our nervous system allows us to be.
What do I mean by "allow"? There are several protective mechanisms which exist
in our bodies and these safeguards can greatly impair our efforts to display
maximal strength. Some rare cases in which our safeguards are "turned off" — a
frail woman lifting a car to save her kid for example — give us an idea about
our real strength potential. As one strength coach says, "Your muscles already
have the strength to lift a car; they just don't know it yet!"
The lower the activation threshold of these safeguards, the harder it'll be for
you to produce a large amount of force. This can help explain how seemingly
"average looking" individuals can sometimes actually produce more force than
bulkier, more muscular people: their safeguards have a very high activation
threshold. They might be able to use 70 to 80% of their strength potential while
you may only be able to use 40 to 50%.
Many bodybuilders and athletes have a lot of muscle mass, but a very low
threshold. This is like having an army with 1,000 soldiers, but only 400
actually willing to fight. On the other hand, another army might only have 800
soldiers, but 700 of them make William Wallace in Braveheart look like a sissy.
Obviously the second army will be more effective and efficient. The same is true
for you: having a lot of muscles is good, but you have to get your "soldiers" to
work for you!
So, how can you motivate your troops? There are several proven methods which may
help you increase your capacity to produce force in the gym. Some are long-term
solutions while others are short term. A program involving both of these can
help you drastically increase your strength potential much faster than you'd
have thought possible. These methods involve playing with the reflex actions and
the central nervous system (CNS).
First, I'll discuss three short-term methods that can help you produce a bit
more strength right away. It might enable you to produce 3 to 5% more force,
which may not seem like much, but will allow you to place more stimulation on
your muscles which will increase your rate of strength and muscle gains. These
three methods are:
1) Antagonist stretch
2) Antagonist pre-contraction
3) Irradiation/stable base
Let's examine each:
It's well documented that intense stretching prior to a muscle contraction
greatly reduces the force production potential from that contraction. That's one
of the reasons why it's best to stretch after a workout rather than before it.
We can use this little tidbit of information to our advantage. There's this
thing called antagonist co-contraction which can actually reduce our capacity to
lift big weights. How? It's fairly simple to understand: if an antagonist muscle
(a muscle of the opposite function than the target muscle) has a lot of tension
in it, it'll take more force for the agonist muscle to produce a certain
movement. For example, if your triceps are contracting, it'll be harder to curl
big weights. The triceps are elbow extensors while the biceps are elbow flexors;
the contraction of an extensor will make the flexion harder to do.
So if we can reduce the contraction potential of the antagonist muscles, their
level of co-contraction will be less. As a result, the inhibitory effect of the
antagonist will be reduced, thus allowing you to lift more weight. If the
antagonists are contracting, not only do you have to fight the barbell, you have
to fight the antagonist muscles too!
In the bench press, the prime movers and synergists (agonists) are: the anterior
deltoids, the triceps, and the pectorals/serratus. So we can conclude that the
antagonists are the posterior deltoids, the biceps, and the latissimus dorsi/rhomboids.
Now we know that stretching a muscle will reduce its capacity to contract, so
stretching the antagonists right before attempting a bench press will facilitate
the action of the prime movers and synergists!
Research has found that a brief maximal voluntary contraction (BMVC) of the
antagonists immediately prior to a movement increases the force production of
the agonists (Caiozzo et al. 1981, D.G. Sale, 1986).
It's been theorized that the pre-contraction of the antagonists counters their
subsequent inhibitory effect, which as we already know, will facilitate the
action of the prime movers and synergists. Caiozzo et al. have even concluded
that "a strength training program that employs the pre-contraction technique is
more effective for increasing low-velocity strength than only training the prime
Again, using the bench press as an example, this is relatively easy to do. While
the bar is still racked, take your bench press grip and pull down as hard as you
can, trying to bring the bar to you. Brace yourself so that you won't leave the
bench. This will result in a maximal static contraction of the antagonist
muscles of the bench press. Hold that contraction for six seconds, relax for
five to ten seconds, then proceed with your bench press set.
This principle is quite simple. Irradiation means tension present in a muscle
will "spill over" to nearby muscles. Furthermore, by "bracing" your body (thus
creating more stability for pressing), you increase force production.
The more stable your body is, the more force you can produce. As the saying
goes, you can't shoot a cannon from a canoe — it'll tip over! Even if you have a
very powerful cannon, you won't be able to use that power. That's one of the
reasons why I don't like Swiss balls for strength training. The prime movers
simply can't produce maximum force so the training effect will be smaller.
To take advantage of this phenomenon while benching, I recommend a simple
1. Grip the bar as hard as possible.
2. Try to rip the bar apart (exerting static strength toward the outside with
3. Keep the glutes tightly contracted during the bench press.
4. "Screw" your feet into the ground.
These three tricks — antagonist stretch, antagonist pre-contraction,
irradiation/stable base — will allow you to make better use of the potential
strength of your muscles, but they aren't miracle techniques. In fact, at first
they might feel weird and may even decrease your performance initially, but once
you get used to them your bench press strength will be vastly improved!
What we want to accomplish in the long run is an increase in the safeguards'
activation threshold. This will allow us to exert much more force before we're
shut down by our central nervous system. Increasing the threshold can increase
your strength potential by 10 to 20%!
The only way to increase the threshold is to use high-tension methods regularly
and systematically. The most effective high-tension methods (methods which cause
a great level of intramuscular tension) are:
1) Plyometrics/shock absorption
2) Heavy lifting
3) Static holds and partial reps
Plyometrics and the shock method are currently used for lower-body power
development. This includes depth jumps, loaded jumps, and landing from various
heights. However, very few people use the same methods for the upper body. I've
found that such drills can be very effective at improving bench-pressing
strength. The two drills I use are the ballistic bench press and iso-ballistic
Ballistic Bench Press
This is the only exercise in which I consider using the Smith machine effective.
The objective is to lower the bar to the chest, throw the load in the air, then
catch it and start again. The load you use should be light, because the goal is
not to just be explosive, but to be ballistic.
This drill is the upper body equivalent of the depth jump. The goal is to drop
down into a push-up, project yourself in the air, land with the arms slightly
bent and hold the position for fifteen seconds. This constitutes one rep.
Ideally you want to do 3-6 reps per set for 3-4 sets.
There's an obvious reason why powerlifters and Olympic lifters are strong: they
lift big weights in training! High reps and high-volume training are good if all
you want is muscle mass, but to develop maximal strength you must pay your dues
under some heavy barbells! This is commonly referred to as the "maximum effort
method" and it calls for loads of 90 to 100% and low reps.
Static Holds and Partial Reps
The objective of these exercises is to get you used to holding very heavy
weights at arms length. By holding supra-maximal weights, you condition your
nervous system and motor reflexes to accept this high form of loading and
The reason behind this is that you have an inhibitory reflex which is the "gift"
of the Golgi Tendon Organ (GTO). When muscle tension is very high, it tells your
muscles to stop producing force. This is a protective mechanism, but in most
individuals it's set too conservatively and can impair your lifting prowess.
Reduced inhibition is one of the reasons you see some small individuals handling
For static holds you simply un-rack (with a partner) a load that's greater than
your maximum and hold the load in the lock-out position for a certain period of
time. Partials are another variation since they allow you to use more reps than
a full range of motion exercise.
Obviously these long term methods are quite hard on the system. For that reason
their use is to be limited to a small volume of work performed once per week
(preferably on Monday when the nervous system is fresh from the weekend's rest).
Start conservatively and add volume and load from there.
On the other hand, the short term tricks can and should be used at every bench
press session. The more you practice these techniques, the more you'll benefit
Now get those soldiers working for you and go to war!